JTDM-25/JTDM-25联立桌式双工位多头攻丝机(双工位多轴攻丝机)
JTDM-25 / JTDM-25 Joint Table Double Job Long Threading Machine(Double Work Multi-axis Threading Machine)
JTDM-25/JTDM-25联立桌式双工位多头攻丝机(双工位多轴攻丝机),两工位工牙，操作简单。广泛应用于机械制造业,如阀门制造业,水暖五金业,汽车摩托配件,有色金属压铸加工业,电子及零部件加工等行业中加工螺纹孔。一个面孔多，一次无法完成全部螺纹孔攻牙作业。可双分两个工位完成螺纹攻牙作业。两工位独立操作，只需一人操作。为企业减少人员成本，及更大的降低企业加工成本，使企业的经济效益更大化。
JTDM-25/JTDM-25联立桌式双工位攻丝机(双工位多轴攻丝机),两工位都采用导螺杆自动进刀，等距攻牙，斜坡式排削（砖利设计）。加工时切削液自动供给，上、下限位采用电子感应开关，设备调节方便，自动化程度高，操作简单。设备有自动，手动功能。
JTDM-25 / JTDM-25 joint table double position long tie-tapping machine(double position multi-axis tie-tapping machine), two positions of work teeth, simple operation. Widely used in machinery manufacturing, such as valve manufacturing, plumbing hardware industry, automotive motorcycle accessories, non-ferrous metal die-casting processing industry, electronics and parts processing and other industries processed thread holes. One face more than one, can not complete all the thread hole attack tooth work. Can be divided into two positions to complete the thread tooth work. Two positions are operated independently and only one person is required to operate. For enterprises to reduce the cost of personnel, and a greater reduction in enterprise processing costs, so that the economic benefits of enterprises greater.
JTDM-25 / JTDM-25 stand table double position tie-tapping machine(double position multi-axis tie-tapping machine), both positions use a guide screw automatic approach knife, equidistant attack teeth, slope type layout(patent design). Automatic supply of cutting fluid during processing, electronic sensor switch for upper and lower limit, easy to adjust, high degree of automation, simple operation. The device has automatic, manual functions.
JTDM-25/JTDM-25联立桌式双工位攻丝机(双工位多轴攻丝机)详细参数
JTDM-25 / JTDM-25 Detailed parameters for a double-position wire-tapping machine(dual-position multi-axis wire-tapping machine)
|
规格
|
JTDM-25/JTDM-25
|
|
|
工作桌面有效尺寸
|
1120×550
|
|
立柱外径
|
Φ102/Φ102
|
|
主轴外径
|
Φ95/Φ95
|
|
主轴锥度
|
MT3/MT3
|
|
主轴心至工作桌面距离
|
350-850MM-350-850MM
|
|
主轴行程
|
80MM/80MM
|
|
主轴转速
|
定速/定速（可选配变频调速）
|
|
主轴功率
|
2HP/8P / 2HP/8P
|
|
*大钻孔、攻牙能力
|
(S45C)M25/M25
|
|
总重量
|
900kg
|
|
注：双联型机床可以根据客户加工工件工艺要求任意组合，可以组合为JTDZ-25/JTDZ-25
(双工位两钻)、JTDM-25/JTDM-25(双工位两攻)、JTDZ-25/JTDM-25(双工位一钻一攻)
|
Note: Dual machine tools can be arbitrarily combined according to customer processing workpiece requirements, can be combined as JTDZ-25 / JTDZ-25
(double position two diamonds), JTDM-25 / JTDM-25(double position two attacks), JTDZ-25 / JTDM-25(double position one drill one attack)
