如果您对该产品感兴趣的话,可以
产品名称:
桌式伺服多轴钻攻机床
产品型号:
NC-20(BP)
产品厂商:
其它品牌
简单介绍
NC-20(BP)桌式伺服多轴钻攻机床
NC-20(BP)桌式伺服多轴钻攻机床采用伺服驱动主轴自动进退刀，可实现自动快速进退刀，慢速工进加工，可实现多段自动退屑分段加工，
NC-20(BP)桌式伺服多轴钻攻机床比传统油压自动多轴钻床的优点：
1.节能：比传统的油压自动多轴钻床更加省电。响应国家节能减排。
NC - 20 (BP) table servo multi-axis drilling and tapping machine
- 20 (BP) table servo NC multi-axis drilling and tapping machine adopts servo drive spindle automatic cutting, which can realize automatic fast cutting, slow
桌式伺服多轴钻攻机床的详细介绍
NC-20(BP)桌式伺服多轴钻攻机床
NC - 20 (BP) table servo multi-axis drilling and tapping machine
NC-20(BP)桌式伺服多轴钻攻机床采用伺服驱动主轴自动进退刀，可实现自动快速进退刀，慢速工进加工，可实现多段自动退屑分段加工，多轴钻孔加工，多轴攻丝加工。配备触摸式人机界面控制屏，可直观、方便、简单的实现操作。配合多轴器实现多轴钻攻作业，是目前*前端的NC-20伺服桌式多轴钻孔机床。加工时切削液自动供给，配套豪华式防水钣金及斜坡式排屑砖利设计床身。是理想的多轴钻孔加工母机。
NC-20(BP)桌式伺服多轴钻攻机床比传统油压自动多轴钻床的优点：
1.节能：比传统的油压自动多轴钻床更加省电。响应国家节能减排。
2.节省长期的维护费用：节省初史油压油的购买费用及以后定期更换液压油的费用。
3.故障排除简单：采用PLC控制，维修、故障排除简单方便。
4.采用人机界面：操作简单。
The NC-20(BP) table servo multi-axis drilling machine tool uses a servo drive spindle automatic quail knife to achieve automatic rapid quagmire knife, slow work processing, can achieve Multi-segment automatic dander section processing, multi-axis drilling processing, multi-axis tapping processing. Equipped with a touch-type human-machine interface control screen, it can be intuitively, conveniently and simply implemented. With multi-axis device to achieve multi-axis drilling operation, is the most front-end NC-20 servo table multi-axis drilling machine tool. Automatic supply of cutting fluid during processing, matching luxury waterproof sheet metal and sloping chip patent design bed. It is an ideal multi-axis drilling machine.
The advantages of the NC-20(BP) table servo multi-axis drilling machine tool over the traditional hydraulic automatic multi-axis drilling machine:
1. Energy conservation: More energy saving than traditional hydraulic automatic multi-axis drilling machines. Respond to national energy conservation and emission reduction.
2. Save long-term maintenance costs: Save the purchase cost of initial hydraulic oil and the cost of replacing hydraulic oil regularly later.
3. Fault
NC-20(BP)桌式伺服多轴钻攻机床
NC - 20 (BP) table servo multi-axis drilling and tapping machine
|
规格
|
NC-20(BP)
|
|
|
工作桌面有效尺寸
|
Φ440
|
|
立柱外径
|
Φ102
|
|
主轴外径
|
Φ95
|
|
主轴锥度
|
MT3
|
|
主轴心至工作桌面的距离
|
300-850mm
|
|
主轴行程
|
140mm
|
|
主轴转速
|
无极
|
|
主轴功率
|
2HP/6P
|
|
主轴进刀
|
无极调速
|
|
*大钻攻能力
|
Φ20/M20（S45C）
|
|
总重量
|
600KG
|
NC-20(BP)桌式伺服多轴钻攻机床加工通的螺纹孔时可以采用钻攻复合刀具一次性完成螺纹底孔的钻孔加工，攻牙加工，产品一次装夹。加工精度高。流水作业时，可以快速的切换钻孔、攻丝工序，不用在为不同的产品，加工工序多一道、少一道来调速机床而烦脑。
When the NC-20(BP) table servo multi-axis drilling machine tool processing thread holes can be used to drill the composite tool to complete the drilling process of the screw bottom hole at one time, attack the tooth processing, and the product is clamped at one time. High machining precision. When running water, you can quickly switch drilling and wire tapping processes. You do not have to worry about different products. The processing processes are more and less to speed up the machine tools.
