重切削可调多轴器 SWU110/SWU165/SWU200/SWU250/SWU300

点击查看大图

产品价格： < 面议

产品型号：SWU110/SWU165/SWU200/SWU250/SWU300

品牌：其它品牌

公司名称：无锡耐玖机电设备有限公司

所在地：江苏无锡

浏览次数：1680 次

立即询价在线咨询

产品简介

◇SWU型圆型重切削可调多轴器（多轴钻孔器/多轴头/多轴钻/群钻）结构利用齿轮箱配合万向节头所组成，重切削可调多轴器容易调整,加工孔距不受齿轮限制，节省调整的时间，也少有死角的限制，适合加工接近圆周分布的工作，SWU型圆型重切削可调多轴器是可调试中*容易操作使用的规格。为保万向节头这寿命，
SWU type circular heavy cutting adjustable multi-axis device(multi-axis driller/multi-axis head/multi-axis drill/group drill) structure using a gearbox with universal joint head, easy to adjust, processing hole distance is not limite

产品详细信息

SWU型圆型重切削可调多轴器

SWU circular heavy cutting adjustable multi-axle

◇SWU型圆型重切削可调多轴器（多轴钻孔器/多轴头/多轴钻/群钻）结构利用齿轮箱配合万向节头所组成，容易调整,加工孔距不受齿轮限制，节省调整的时间，也少有死角的限制，适合加工接近圆周分布的工作，SWU型圆型重切削可调式多轴器是可调试中*容易操作使用的规格。为保万向节头这寿命，移动范围不得超过15度，等于垂直这前后左右30mm以内（尽量配合工作之孔距坐标，设计齿轮箱结构即定镗孔位） ※SWU型圆型重切削可调多轴器万向节注意事项： 1、调整时不能超过规定的角度15度２、如超过些极限心轴易磨损或断裂３、工作时应经常加润滑油脂 SWU type circular heavy cutting adjustable multi-axis device(multi-axis driller/multi-axis head/multi-axis drill/group drill) structure using a gearbox with universal joint head, easy to adjust, processing hole distance is not limited by gear, save adjustment time, There are also few dead angle restrictions, suitable for processing work close to the circular distribution, SWU-type circular heavy cutting adjustable multi-axle device is the most easily operated specifications in debugging. In order to protect the life of the universal node, the range of movement must not exceed 15 degrees, which is equal to the vertical front and rear within 30 mm. (As far as possible with the working hole distance coordinates, the design gear box structure is fixed boring hole position) Notes for the universal section of the SWU type adjustable multi-axis cutter for heavy cutting: 1, adjustment can not exceed the specified angle 15 degrees 2, if more than some limit of the axis easily wear or break Always lubricate your work with grease 有以下规格(With the following specifications):SWU110/SWU165/SWU200/SWU250/SWU300
型号	SWU110	SWU165	SWU200	SWU250	SWU300
筒夹规格/ 钻孔能力	ER20/13 ER25/16	ER20/13 ER25/16	ER20/13 ER25/16	ER20/13 ER25/16	ER20/13 ER25/16
转速比	1:1 1:2	1:1 1:2	1:1 1:2	1:1 1:2	1:1 1:2
两轴*小间距	42 45	42 45	42 45	42 45	42 42
*大轴心范围	110	165	200	250	300
轴数	2-6	2-6	4-10	4-10	4-10